NAS Data Recovery Services

Your NAS is the single point of failure for your photos, documents, databases, and backups. When it stops working – or worse, when the vendor says “re-initialize” – the data inside matters more than the device itself.

ACE RAID Recovery recovers data from every major NAS platform. We work on the physical drives and the proprietary RAID layouts underneath – because a NAS is a small computer running a specialized OS on top of a RAID, and both layers can fail.

Why NAS devices fail

Disk failures

One or more drives die; SHR/RAID arrays degrade

NAS unit failure

The motherboard or controller dies, and drives won’t work in another unit

Firmware / OS corruption

DSM, QTS, or another NAS OS crashes or updates badly

Accidental deletion or reset

Factory resets, failed updates, deleted shares

Beyond plain RAID: how NAS appliances really store your data

A NAS is not a RAID controller with a network port. Vendors put a proprietary layer on top of the disks, and that layer is usually where a recovery actually happens — or where a generic rebuild tool destroys the last chance of one.

Platform Storage layer What matters in recovery
Synology DSM SHR / SHR-2 on mdadm + LVM, ext4 or Btrfs SHR mixes different-size disks into multiple RAID groups; the group map lives in the DSM system partition on every member
QNAP QTS Static and thick/thin volumes on mdadm + LVM, ext4 or ZFS (QuTS hero) Volume and storage-pool metadata are separate; a lost pool does not mean lost volume definitions
Drobo BeyondRAID — proprietary, virtual hot spare, mixed drives No standard RAID layout exists; the pack order is discovered from the disks themselves
Netgear ReadyNAS X-RAID / X-RAID2 with Btrfs or ext4 Automatic expansion changes the layout over time; the current geometry must be derived, not assumed
Buffalo TeraStation Proprietary RAID plus ext3/ext4 and iSCSI targets Firmware versions differ in metadata format; matching the original firmware matters
TrueNAS / ZFS ZFS pools, vdevs, RAIDZ1/2/3 Pool import needs the exact pool geometry and ashift; a destroyed pool can still be reassembled from vdev labels

That is why a NAS case cannot be handled with the same assumptions as a server array. BeyondRAID has no fixed parity rotation. SHR can put the same volume on two different RAID groups. X-RAID2 changes geometry when disks are swapped for larger ones. ZFS keeps its own copy-on-write history. The recovery starts with identifying which of these layouts is in front of us — the wrong assumption produces a plausible-looking but corrupt volume.

Filesystems and layers inside a NAS volume

Under the RAID layer there is usually more than one thing to rebuild before any file becomes visible again.

Volume managers

LVM on top of mdadm (Synology, QNAP), Btrfs subvolumes, thin provisioning, and iSCSI LUNs presented over the network — each adds a mapping that has to be reconstructed.

Filesystems

ext4, Btrfs (including compressed and snapshotted subvolumes), XFS, ZFS, and the older ext3 filesystems still common on ReadyNAS and TeraStation units.

Encryption

Synology and QNAP shared-folder encryption, eCryptfs, LUKS and SED drives. Recovery is done on the image once the key or passphrase is available — the data is never decrypted in place.

Snapshots and versioning

Btrfs and ZFS snapshots, Synology Snapshot Replication and QNAP snapshots retain older block versions that often predate the corruption — frequently the cleanest source of a file.

Symptoms of a NAS that is failing

NAS failures are usually announced well before they become total. What the appliance reports and what the disks are doing are two different stories:

  • Volume status degraded, crashed, or “not mounted” in DSM, QTS or the web UI
  • The appliance boots but shows no volumes, or volumes of the wrong size
  • A disk marked failed, or the same disk re-failing after a replacement
  • Rebuild or “repair” running for days, or restarting from scratch after a reboot
  • Shared folders visible but empty, or files that open as zero bytes
  • Btrfs reporting checksum errors, “unrecoverable errors”, or read-only remounts
  • ZFS pool in DEGRADED, FAULTED or UNAVAIL state
  • iSCSI LUN or NFS share disappears while the appliance itself remains reachable
  • After a DSM or QTS update the volume is no longer recognised

What not to do with a failed NAS

Don’t run “repair” again

Every repair cycle rewrites metadata on the surviving members. If the first one failed, the second one works on a worse starting point.

Don’t factory-reset to “start clean”

A reset re-creates the system partition on every disk. That partition holds the volume map the recovery needs.

Don’t swap disks to “test” them

Moving a member to another slot or another unit can trigger an automatic import that rewrites the array configuration.

Don’t reinstall DSM/QTS onto the same disks

The installer writes to the system partition on all members before it looks at the data volumes.

Don’t rebuild with a replacement disk

On SHR, X-RAID2 or BeyondRAID a rebuild can change the geometry of the whole volume — and a geometry change makes the original layout unrecoverable.

NAS recovery: time and cost

NAS pricing follows the same per-disk model as server arrays, but the work in front of it differs: the appliance layer, the volume manager and the filesystem have to be reconstructed before a single file is visible. Evaluation is free and the quote is fixed before work starts.

Scenario Typical turnaround Typical cost
Volume will not mount, disks healthy – Btrfs/ext4 or LVM damage 2–5 business days From $1,000 per disk
Degraded or crashed volume, one member missing 3–10 business days $1,000–$2,500 per disk
SHR, BeyondRAID or X-RAID2 with non-standard geometry 5–12 business days $1,500–$2,500 per disk
Encrypted volume, key available Adds 1–3 days No surcharge
Physically failing drives – clicking, seized, damaged 5–20 business days (clean room) Quoted after evaluation
Emergency priority 24–48 hours Premium tier, quoted upfront

Send the drives with their original slot order and, if possible, a note of the model, the DSM/QTS version and whether encryption or snapshots were enabled. That single page of information often saves a day of reconstruction.

Encryption, snapshots and cloud sync

Encrypted volumes are recoverable, but the key has to be available: a Synology or QNAP encrypted shared folder, a LUKS container or a BitLocker volume is reconstructed from the raw image and then opened with the key material, never decrypted in place on the original disks. Snapshots work in the opposite direction — they are an advantage, because Btrfs and ZFS keep older block versions that frequently predate the corruption, and a file that is unreadable in the current state is often intact in a snapshot from a week earlier.

Cloud sync is not a backup either. A NAS syncing to a cloud provider usually propagates deletions and encryption just as faithfully as it propagates new files, and by the time the local volume is repaired the cloud copy is already wrong. In those cases the local disks remain the best source of the data — which is another reason to image them before anything is reset.

NAS systems we recover

Vendor Special notes
Synology DSM, SHR and RAID, btrfs/ext4
QNAP QTS/QuTS, RAID 5/6, Qtier
Drobo Proprietary BeyondRAID
Netgear ReadyNAS X-RAID, ReadyNAS OS
Buffalo TeraStation Proprietary formatting, controller failures

NAS recovery process

1

Free evaluation

We assess the drives (remotely via ARRM or in-lab) and tell you the real chances.

2

Fixed quote

Typically $1,000-$2,500 per disk, depending on the case.

3

Recovery

We image the drives and rebuild the proprietary RAID layout in software.

4

Verified return

Your data delivered on a new drive or via secure transfer.

Most recoveries take 3-15 days depending on complexity and volume; emergency cases in 24-48 hours.

Start your free evaluation

Call 844-223-7243 — engineers answer 24/7 — or start a case online.

No data, no fee

Start a Case

Frequently Asked Questions

Do I need to send my whole NAS?

Usually not – the drives contain the data. We’ll tell you exactly what to send after the free evaluation.

Can you recover a Synology SHR or SHR-2 volume?

Yes. SHR can span several RAID groups with different geometry, so we reconstruct the group map from the DSM system partition on each member and rebuild the mdadm/LVM layers before touching the filesystem.

My NAS will not boot. Do I need to send the appliance?

In most cases no – the disks carry everything needed. Send the drives with their slot order; if the failure is in the chassis, backplane or controller, we tell you during the evaluation.

Do you recover Drobo BeyondRAID packs and ReadyNAS X-RAID2?

Yes. Both use proprietary, non-standard layouts with no fixed parity rotation, so the geometry is derived from the disks rather than assumed – the same approach we use for every appliance-specific format.

Can a NAS be recovered after a factory reset?

Often yes, if the reset didn’t overwrite the data area. Stop using the unit and call us.

Is NAS recovery possible remotely?

Yes – for many cases we connect securely via ARRM and image drives in place.

Dallas17778 Preston Rd, TX 75252
Houston1445 N Loop W, Suite 470, TX 77008
Chicago5440 N Cumberland Ave, Suite A109, IL 60656

Ready to Start Your Recovery?

Speak directly with a senior RAID engineer. Free consultation and diagnostic.

Tap to Call — 844-223-7243